Publicaciones

Filtrar búsqueda:

565 registros « 1 de 12 »

2023

Reis, P. N. B.; Sousa, P.; Ferreira, Luis Miguel; Coelho, C. A. C. P.

Multi-impact Response of Semicylindrical Composite Laminated Shells with Different Thicknesses Artículo de revista

En: COMPOSITE STRUCTURES, 310 , 2023, ISSN: 0263-8223.

Enlaces | BibTeX | Etiquetas:

Sánchez-Carmona, S.; Barroso, A.; Mantič, V.; Correa, E.; París, F.

Non-conventional failures caused by the edge effect in cross-ply laminates made of ultra-thin plies Artículo de revista

En: COMPOSITES PART B-ENGINEERING, 254 , 2023, ISSN: 1359-8368.

Enlaces | BibTeX | Etiquetas:

Sánchez‐Carmona, Serafín; Correa, Elena; Barroso, Alberto; París, Federico

Fatigue life of unidirectional 90° carbon/epoxy laminates made of conventional and ultra‐thin plies varying manufacturing and testing conditions Artículo de revista

En: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 46 (5), 1837-1847. , 2023, ISSN: 8756-758X.

Enlaces | BibTeX | Etiquetas:

Sánchez-Carmona, Serafín; López, María Luisa Velasco; Caro, Alberto Barroso; Montoto, Elena Correa

Thermomechanical characterisation data of 30 g/m2 and 150 g/m2 cured unidirectional carbon/epoxy tape prepreg TP 402/T700S Artículo de revista

En: DATA IN BRIEF, 47, 108966-. , 2023, ISSN: 2352-3409.

Enlaces | BibTeX | Etiquetas:

Jha, N. K.; Moradalizadeh, S.; Reinoso, J.; Topol, H.; Merodio, J.

On the helical buckling of anisotropic tubes with application to arteries Artículo de revista

En: MECHANICS RESEARCH COMMUNICATIONS, 128 , 2023, ISSN: 0093-6413.

Enlaces | BibTeX | Etiquetas:

Liu, Z.; Marino, M.; Reinoso, J.; Paggi, M.

A continuum large-deformation theory for the coupled modeling of polymer–solvent system with application to PV recycling Artículo de revista

En: INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, 187 , 2023, ISSN: 0020-7225.

Enlaces | BibTeX | Etiquetas:

Liu, Zeng; Lenarda, Pietro; Reinoso, José; Paggi, Marco

A multifield coupled thermo-chemo-mechanical theory for the reaction-diffusion modeling in photovoltaics Artículo de revista

En: INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2023, ISSN: 0029-5981.

Enlaces | BibTeX | Etiquetas:

García, Israel García; Corominas, Adria Quintanas; Cuevas, Jose Antonio Reinoso; Mantič, Vladislav; Sánchez, S.; Bernal, Patricia Lucía Zumaquero; Romero, María Teresa Aranda

Simuladores de prácticas de laboratorio en mecánica de medios continuos como complemento formativo a las prácticas reales en el laboratorio Capítulo de libro

En: 301-310. , 2023, ISSN: 978-84-1122-686-8.

BibTeX | Etiquetas:

Valverde-González, A.; Reinoso, J.; Dortdivanlioglu, B.; Paggi, M.

Locking treatment of penalty-based gradient-enhanced damage formulation for failure of compressible and nearly incompressible hyperelastic materials Artículo de revista

En: COMPUTATIONAL MECHANICS, 2023, ISSN: 0178-7675.

Enlaces | BibTeX | Etiquetas:

Mantič, Vladislav; Barroso, Alberto; París, Federico

Computational procedure for singularity analysis of anisotropic elastic multimaterial corners - Applications to composites and their joints Capítulo de libro

En: Ltd, World Scientific Publishing Co. Pte (Ed.): 13, 613-695. , 2023, ISSN: 2044-9283.

Enlaces | BibTeX | Etiquetas:

Reinoso, José; Paggi, Marco; Blázquez, Antonio

A modeling framework for the analysis of instabilities and delamination in composite shells Capítulo de libro

En: Ltd, World Scientific Publishing Co. Pte (Ed.): 13, 209-258. , 2023, ISSN: 2044-9283.

Enlaces | BibTeX | Etiquetas:

Velasco, M. L.; Correa, E.; Sánchez-Carmona, S.; París, F.

Evolution of the damage onset and morphology in [0/90n/0] laminates when increasing the ply thickness Artículo de revista

En: COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 170 , 2023, ISSN: 1359-835X.

Enlaces | BibTeX | Etiquetas:

Roubíček, Tomáš; Kružík, Martin; Zeman, Jan; Panagiotopoulos, Christos G.; Vodička, Roman; Mantič, Vladislav

Delamination and adhesive contacts, their mathematical modeling and numerical treatment Capítulo de libro

En: Ltd, World Scientific Publishing Co. Pte (Ed.): 13, 497-578. , 2023, ISSN: 2044-9283.

Enlaces | BibTeX | Etiquetas:

Mantič, Vladislav

Preface Artículo de revista

En: Computational and Experimental Methods in Structures, 13, VII-XII. , 2023, ISSN: 2044-9283.

Enlaces | BibTeX | Etiquetas:

Corrado, G.; Ntourmas, G.; Sferza, M.; Tan, W.; Traiforos, N.; Arteiro, A.; Brown, L.; Chronopoulos, D.; Daoud, F.; Glock, F.; Ninic, J.; Ozcan, E.; Reinoso, J.; Schuhmacher, G.; Turner, T.

Corrigendum to “Recent progress, challenges and outlook for multidisciplinary structural optimization of aircraft and aerial vehicles” [Prog. Aero. Sci. 135 (2022) 100861] (Progress in Aerospace Sciences (2022) 135, (S0376042122000537), (10.1016/j.paerosci.2022.100861)) Artículo de revista

En: Progress in Aerospace Sciences, 139 , 2023, ISSN: 0376-0421.

Enlaces | BibTeX | Etiquetas:

Sánchez-Carmona, Serafín; Correa, Elena; Barroso, Alberto; París, Federico

Experimental observations of fatigue damage in cross-ply laminates using carbon/epoxy ultra-thin plies Artículo de revista

En: COMPOSITE STRUCTURES, 306 , 2023, ISSN: 0263-8223.

Enlaces | BibTeX | Etiquetas:

2022

del Mar Muñoz-Reja Moreno, María; Mantič, Vladislav; Mendoza, Luís Arístides Távara

Implementación computacional del principio de mínima energía total sometido a una condición de tensión (pmte-sc) del criterio acoplado de la mecánica de la fractura finita aplicado al LEBIM Conferencia

(3), 167-172. , 2022, ISSN: 2792-4246.

BibTeX | Etiquetas:

Romero, María Teresa Aranda; García, Israel García; Cuevas, Jose Antonio Reinoso

On the effect of the interface radius on the ability to arrest cracks of curved weak interfaces Conferencia

(3), 137-142. , 2022, ISSN: 2792-4246.

BibTeX | Etiquetas:

Romero, María Teresa Aranda; Cuevas, Jose Antonio Reinoso; García, Israel García

On different 3D printing methods and fracture performance in dcb composite specimens including structured interfaces Conferencia

(3), 33-38. , 2022, ISSN: 2792-4246.

BibTeX | Etiquetas:

Rodríguez, P. Olivares; Corominas, Adria Quintanas; Pañeda, Emilio Martínez; Cuevas, Jose Antonio Reinoso; Durand, P.

Diferentes enfoques para la fractura dúctil basados en la metodología phase-field: Aplicación a modelos de plasticidad asociada y no asociada Conferencia

(3), 101-106. , 2022, ISSN: 2792-4246.

BibTeX | Etiquetas:

Corrado, Giuseppe; Arteiro, Albertino; Marques, António Torres; Daoud, Fernass; Glock, Florian; Reinoso, José

Extended failure models for global and local analyses of composite aerostructures Conferencia

1, 152-159. , 2022, ISSN: 9782970161400.

BibTeX | Etiquetas:

Guillén-Hernández, T.; Reinoso, J.; Paggi, M.

Phase field model for fracture analysis of functionally graded power-based shell structures Artículo de revista

En: Mechanics of Advanced Materials and Structures, 29 (1), 78-88. , 2022, ISSN: 1537-6494.

Enlaces | BibTeX | Etiquetas:

Tserpes, K.; Barroso-Caro, A.; Carraro, P. A.; Beber, V. C.; Floros, I.; Gamon, W.; Kozlowski, M.; Santandrea, F.; Shahverdi, M.; Skejić, D.; Bedon, C.; Rajčić, V.

A review on failure theories and simulation models for adhesive joints Artículo de revista

En: JOURNAL OF ADHESION, 98 (12), 1855-1915. , 2022, ISSN: 0021-8464.

Enlaces | BibTeX | Etiquetas:

Liu, Z.; Reinoso, J.; Paggi, M.

A humidity dose-CZM formulation to simulate new end-of-life recycling methods for photovoltaic laminates Artículo de revista

En: ENGINEERING FRACTURE MECHANICS, 259 , 2022, ISSN: 0013-7944.

Enlaces | BibTeX | Etiquetas:

Marín, J. C.; Graciani, E.

Normal stress flow evaluation in composite aircraft wing sections by strength of material models Artículo de revista

En: COMPOSITE STRUCTURES, 282 , 2022, ISSN: 0263-8223.

Enlaces | BibTeX | Etiquetas:

Aranda, M. T.; García, I. G.; Reinoso, J.; Mantič, V.

Experimental evaluation of the similarity in the interface fracture energy between PMMA/epoxy/PMMA and PMMA/epoxy joints Artículo de revista

En: ENGINEERING FRACTURE MECHANICS, 259 , 2022, ISSN: 0013-7944.

Enlaces | BibTeX | Etiquetas:

Dusane, A. R.; Budarapu, P. R.; Pradhan, A. K.; Natarajan, S.; Reinoso, J.; Paggi, M.

Simulation of bridging mechanisms in complex laminates using a hybrid PF-CZM method Artículo de revista

En: Mechanics of Advanced Materials and Structures, 29 (28), 7743-7771. , 2022, ISSN: 1537-6494.

Enlaces | BibTeX | Etiquetas:

Kumar, Pavan Kumar Asur Vijaya; Dean, Aamir; Sahraee, Shahab; Reinoso, José; Paggi, Marco

Non-linear thermoelastic analysis of thin-walled structures with cohesive-like interfaces relying on the solid shell concept Artículo de revista

En: FINITE ELEMENTS IN ANALYSIS AND DESIGN, 202 , 2022, ISSN: 0168-874X.

Enlaces | BibTeX | Etiquetas:

Cañas, J.; Blázquez, A.; Estefani, A.; Távara, L.

Accurate determination of the stiffness properties for an elastic interface under peeling conditions between homogeneous materials Artículo de revista

En: COMPOSITE STRUCTURES, 285 , 2022, ISSN: 0263-8223.

Enlaces | BibTeX | Etiquetas:

Moreno, Laura; Távara, Luis; Correa, Elena

Numerical analysis of the crack paths produced by fibre–matrix interface failure in cross-ply LFRP laminates Artículo de revista

En: COMPOSITE STRUCTURES, 284 , 2022, ISSN: 0263-8223.

Enlaces | BibTeX | Etiquetas:

Corrado, Mauro; Paggi, Marco; Reinoso, José

Dynamic formulation of phase field fracture in heterogeneous media with finite thickness cohesive interfaces Artículo de revista

En: COMPUTATIONAL MATERIALS SCIENCE, 205 , 2022, ISSN: 0927-0256.

Enlaces | BibTeX | Etiquetas:

Corrado, G.; Arteiro, A.; Marques, A. T.; Reinoso, J.; Daoud, F.; Glock, F.

An extended invariant approach to laminate failure of fibre-reinforced polymer structures Artículo de revista

En: Aeronautical Journal, 2022, ISSN: 0001-9240.

Enlaces | BibTeX | Etiquetas:

Herrera-Garrido, María A.; Mantič, Vladislav; Barroso, Alberto

A powerful matrix formalism for stress singularities in anisotropic multi-material corners. Homogeneous (orthogonal) boundary and interface conditions Artículo de revista

En: THEORETICAL AND APPLIED FRACTURE MECHANICS, 119 , 2022, ISSN: 0167-8442.

Enlaces | BibTeX | Etiquetas:

Muñoz-Reja, M.; Mantič, V.; Távara, L.

Comparative analytical study of the coupled criterion and the principle of minimum total energy with stress condition applied to linear elastic interfaces Artículo de revista

En: THEORETICAL AND APPLIED FRACTURE MECHANICS, 119 , 2022, ISSN: 0167-8442.

Enlaces | BibTeX | Etiquetas:

Marulli, M. R.; Valverde-González, A.; Quintanas-Corominas, A.; Paggi, M.; Reinoso, J.

A combined phase-field and cohesive zone model approach for crack propagation in layered structures made of nonlinear rubber-like materials Artículo de revista

En: COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 395 , 2022, ISSN: 0045-7825.

Enlaces | BibTeX | Etiquetas:

Kumar, Pavan Kumar Asur Vijaya; Dean, Aamir; Reinoso, Jose; Paggi, Marco

Nonlinear thermo-elastic phase-field fracture of thin-walled structures relying on solid shell concepts Artículo de revista

En: COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 396 , 2022, ISSN: 0045-7825.

Enlaces | BibTeX | Etiquetas:

Zumaquero, Patricia Lucía; Correa, Elena; Justo, Jesús; París, Federico

Transverse biaxial tests on long fibre reinforced composites Artículo de revista

En: COMPOSITE STRUCTURES, 297 , 2022, ISSN: 0263-8223.

Enlaces | BibTeX | Etiquetas:

Kumar, Pavan Kumar Asur Vijaya; Dean, Aamir; Reinoso, José; Paggi, Marco

Thermo-elastic solid shell formulation with phase field fracture for thin-walled FGMs Artículo de revista

En: THIN-WALLED STRUCTURES, 179 , 2022, ISSN: 0263-8231.

Enlaces | BibTeX | Etiquetas:

Cañas, J.; Justo, J.; París, F.

Evaluation of the interlaminar fracture toughness on composite materials using DCB test on symmetric and unsymmetric configurations Artículo de revista

En: COMPOSITE STRUCTURES, 297 , 2022, ISSN: 0263-8223.

Enlaces | BibTeX | Etiquetas:

Sandino, Carlos; Peuvrel-Disdier, Edith; Agassant, Jean-François; Laure, Patrice; Boyer, Séverine A. E.; Hibert, Geoffrey; Trolez, Yves

Extrusion foaming of linear and branched polypropylenes – input of the thermomechanical analysis of pressure drop in the die Artículo de revista

En: International Polymer Processing, 37 (4), 383-395. , 2022, ISSN: 0930-777X.

Enlaces | BibTeX | Etiquetas:

Cornetti, P.; Muñoz-Reja, M.; Mantič, V.

Cohesive Crack Models and Finite Fracture Mechanics analytical solutions for FRP-concrete single-lap shear test: an overview Artículo de revista

En: THEORETICAL AND APPLIED FRACTURE MECHANICS, 122 , 2022, ISSN: 0167-8442.

Enlaces | BibTeX | Etiquetas:

Liu, Z.; Reinoso, J.; Paggi, M.

Phase field modeling of brittle fracture in large-deformation solid shells with the efficient quasi-Newton solution and global–local approach Artículo de revista

En: COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 399 , 2022, ISSN: 0045-7825.

Enlaces | BibTeX | Etiquetas:

Valverde-González, A.; Martínez-Pañeda, E.; Quintanas-Corominas, A.; Reinoso, J.; Paggi, M.

Computational modelling of hydrogen assisted fracture in polycrystalline materials Artículo de revista

En: INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 47 (75), 32235-32251. , 2022, ISSN: 0360-3199.

Enlaces | BibTeX | Etiquetas:

Sangaletti, S.; García, I. G.

Fracture tailoring in 3D printed continuous fibre composite materials using the Phase field approach for fracture Artículo de revista

En: COMPOSITE STRUCTURES, 300 , 2022, ISSN: 0263-8223.

Enlaces | BibTeX | Etiquetas:

Liu, Z.; Reinoso, J.; Paggi, M.

Hygro-thermo-mechanical modeling of thin-walled photovoltaic laminates with polymeric interfaces Artículo de revista

En: JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 169 , 2022, ISSN: 0022-5096.

Enlaces | BibTeX | Etiquetas:

Aranda, M. T.; Reinoso, J.; García, I. G.

On different 3D printing methods and fracture performance in DCB composite specimens including structured interfaces Artículo de revista

En: THEORETICAL AND APPLIED FRACTURE MECHANICS, 122 , 2022, ISSN: 0167-8442.

Enlaces | BibTeX | Etiquetas:

Valverde-González, A.; Reinoso, J.; Jha, N. K.; Merodio, J.; Paggi, M.

A phase field approach to fracture for hyperelastic and visco-hyperelastic materials applied to pre-stressed cylindrical structures Artículo de revista

En: Mechanics of Advanced Materials and Structures, 2022, ISSN: 1537-6494.

Enlaces | BibTeX | Etiquetas:

Ferreira, Luis; Coelho, Carlos; Reis, Paulo

Impact Response of Semi-Cylindrical Composite Laminate Shells Under Repeated Low-Velocity Impacts Conferencia

2022, ISSN: 9781665418010.

Enlaces | BibTeX | Etiquetas:

Ferreira, Luis; Coelho, Carlos

Modelling Progressive Damage in NCF Composites using the Continuum Damage Mechanics Method Conferencia

2022, ISSN: 9781665418010.

Enlaces | BibTeX | Etiquetas:

Corrado, G.; Ntourmas, G.; Sferza, M.; Traiforos, N.; Arteiro, A.; Brown, L.; Chronopoulos, D.; Daoud, F.; Glock, F.; Ninic, J.; Ozcan, E.; Reinoso, J.; Schuhmacher, G.; Turner, T.

Recent progress, challenges and outlook for multidisciplinary structural optimization of aircraft and aerial vehicles Artículo de revista

En: Progress in Aerospace Sciences, 135 , 2022, ISSN: 0376-0421.

Enlaces | BibTeX | Etiquetas:

565 registros « 1 de 12 »